Description
The Synergy Steering Stabilizer Clamp is designed to mount your steering stabilizer on the tie rod or drag link. A high quality stabilizer clamp is a critical component to your steering design – if it slips or doesn’t fit properly you wind up with unreliable, low performing steering. CNC machined from USA made 1020 DOM, these clamps are available in several tube sizes to fit your factory or aftermarket steering system. This clamp has two 1/2″ mounting holes to accommodate various stabilizers.
Fitment:
| Part # | Tube OD | |
|---|---|---|
| 4050-38 | Factory Jeep JK Tie Rod Synergy Jeep TJ / XJ / ZJ / MJ Drag Link |
1-3/8″ |
| 4050-50 | Synergy Jeep JK Tie Rod Synergy Jeep JL / JT Tie Rod Synergy 2003 – 2013 Dodge Ram 1500 / 2500 / 3500 Synergy 1999 – 2004 Ford Super Duty F-250 / F-350 Synergy 2005+ Ford Super Duty F-250 / 350 / 450 / 550 Drag Link |
1-1/2″ |
| 4050-63 | Factory Jeep JL / JT Tie Rod | 1-5/8″ |
| 4050-75 | Synergy 2014+ Ram Tie Rod Synergy 2005+ Ford Super Duty F-250 / F-350 Tie Rod |
1-3/4″ |
| 4050-20 |
Synergy 2005+ Ford Super Duty F-450 / F-550 Tie Rod |
2.00″ |
Benefits:
- Securely mounts your steering stabilizer to your tie rod or drag link, preventing slippage or unwanted movement
- Zinc plated clamp protects against corrosion or rust, extending the life of your purchase
- Steel design withstands off road abuse, keeping your stabilizer in place
Features:
- Precision CNC machined from 1020 DOM material
- Zinc plating prevents rust and corrosion
- 100% bolt on components assures an easy, trouble free installation with the use of basic hand tools
Includes:
| 4050-38 | 4050-50 | 4050-63 | 4050-75 | 4050-20 |
| (1) 1-3/8″ Steering Stabilizer Clamp Zinc Plated (1) Hardware Kit |
(1) 1-1/2″ Steering Stabilizer Clamp Zinc Plated (1) Hardware Kit |
(1) 1-5/8″ Steering Stabilizer Clamp Zinc Plated (1) Hardware Kit |
(1) 1-3/4″ Steering Stabilizer Clamp Zinc Plated (1) Hardware Kit |
(1) 2″ Steering Stabilizer Clamp Zinc Plated (1) Hardware Kit |
Notes:
- Some late model Jeep JK (2011+) factory stabilizers will require the inner bushing sleeve to be drilled out to 1/2″ for compatibility; If you do not have the resources to drill out the hardened steel, an aftermarket stabilizer is recommended
- Aftermarket Steering Stabilizer options include: Synergy Tuned Fox Performance Series 2.0 IFP Steering Stabilizers, Fox Through Shaft (TS) Stabilizers, or Fox Adjustable Through Shaft (ATS) Stabilizers
- Please note, for use with Fox TS or ATS stabilizers, the Synergy Stabilizer Clamp Adapter is required
- These are not intended for use as a hydro assist mount
Installation Instructions (Please refer to “Step 8” for torque specifications)
More information: www.p65warnings.ca.gov
Reviews
There are no reviews yet.