Description

Give your Ford an aggressive look from front to rear with Rough Countrys 6 in. Ford Suspension Lift Kit! This easy-to-install leveling kit raises the front of your vehicle to be equal height with the rear for a leveled, flush look that gives a better ride height and more aggressive appearance. This kit features a set of front, durable coil springs allowing you gain additional ride height without sacrificing ride quality or performance. A set of radius arm and axle drop brackets are provided to keep everything at optimum angles for a factory-like ride, even after lifting. Our fabricatedrear blocks offer considerably more strength than their cast iron counterparts.A set of Rough Countrys premium N3 shocks are also included in this kit. These fine tuned 10-stage variable high-pressure Nitrogen charged shocks offer a fantastic blend of off-road action and smooth highway ride qualit y. With a durable 18mm spring-loaded piston rod and faster-cooling 54mm shock body.Get the wheels you want! Rough Countrys 6 in. Ford Suspension Lift Kit comes with everything you need to fit up to a 35 in. tire with proper wheel backspacing.Best of all, Rough Countrys 6 in. Ford Suspension Lift Kit is backed by our Lifetime Replacement Warranty.

Features and Benefits
Increased Ground Clearance
Levels The Front w/The Rear Of The Vehicle

Application Summary
1980-1996 Ford Bronco (Liter: 5.0, 4.9, 5.8 & Engine(cc): 4917, 5753 & Engine(ci): 302, 300, 351 & Cylinder: 8, 6 & Block: V, L & Bore(in): 4.00 & Bore(mm): 101.6 & Stroke(in): 3.00, 3.98, 3.50 & Stroke(mm): 76.2, 101.0, 88.9 & Engine Version: Windsor, Modified / Note: 6 in. Lift, Extended Brake Lines Are Recommended~If Equipped w/Front Sway-Bar; Drop Brackets Are Recommended PN[1018]~w/Factory Front Quad Shocks Use Quad Shock Kit PN[Q20014]~Install Time 6-8 Hours~Incl. The Following Parts~U-Bolts~Necessary Installation Hardware~Lift Blocks~Front And Rear Premium N2.0 Series Shocks~Add-A-Leaf Springs~Coil Springs~I-Beam Drop Brackets~Pitman Arm~Radius Arm Drop Brackets~Steering Stabilize

1980-1996 Ford F-150 XL XLT Special Eddie Bauer (Liter: 5.0, 4.9, 5.8, 6.9 & Engine(cc): 4917, 5753 & Engine(ci): 302, 300, 351, 420 & Cylinder: 8, 6 & Block: V, L & Bore(in): 4.00 & Bore(mm): 101.6 & Stroke(in): 3.00, 3.98, 3.50, 4.18 & Stroke(mm): 76.2, 101.0, 88.9, 106.2 & Engine Version: Windsor, Modified & Drive: 4WD / Note: 6 in. Lift, Extended Brake Lines Are Recommended~If Equipped w/Front Sway-Bar; Drop Brackets Are Recommended PN[1018]~w/Factory Front Quad Shocks Use Quad Shock Kit PN[Q20014]~Install Time 6-8 Hours~Incl. The Following Parts~U-Bolts~Necessary Installation Hardware~Lift Blocks~Front And Rear Premium N2.0 Series Shocks~Add-A-Leaf Springs~Coil Springs~I-Beam Drop Brackets~Pitman Arm~Radius Arm Drop Brackets~Steering Stabilizer)